Manufacturing Bloopers, Second Hand, Wrong Packaging
We have a very limited quantity of 6x6 Post Shields that were either returned, have very slight blemishes, or just simply the wrong packaging. Some may not pass our strict manufacturing requirements but still function exactly as intended. This could also mean a slight chip or tiny degree off from a perfectly straight cut. These things won't pass our quality control but will still function as a perfectly good Post Shield at a great price!
|Amount Spent||Shipping Cost|
|$0.00 – $15.00||$4.95|
|$15.01 – $39.98||$8.95|
|$39.99 – $74.99||$13.95|
|$75.00 and up||FREE|
Post Shields, shield the base of posts such as mailboxes, fences, decks etc. They are 4 individual shields that slide together to cover and protect existing or new posts from string trimmers and other lawn care equipment. They install in seconds with no tools necessary and their visually pleasing design adds a luxurious and finished look while saving time and money on unneeded maintenance.
You can now affordably protect your posts and maintain the beauty of your home with Post Shields. If your posts have already taken a beating, you can use Post Shields to cover and immediately stop further destruction
6x6 Post Shields are designed to fit the standard 6x6 labeled post. The standard 6x6 post is 5.5" x 5.5". There are few exceptions so please measure your post to verify its size before purchasing. New treated posts are usually wet and swollen from the treatment process, but they will soon dry out and shrink to the 5.5" x 5.5" standard post size.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
I have a Pergola with 6x6 support posts whose ground-level post covers (Cedar) have deteriorated. These look great for correcting that BUT the posts are screwed into their mounts with screws that protrude from the mounting brackets and do not allow a secure fit for the covers. I will work around that by removing the screws, mounting the covers, and drilling the screws THROUGH them, allowing them to fit properly. Extra work, but there are few alternatives other than crafting new Cedar covers, which I really don't want to do.
The manufacturer was a breeze to deal with, I ordered around 60 for some 6" pressure treated posts. Installation of course was no problem and they look great.
Love the Post Shields I purchased! Purchased 3 in black for deck posts and 1 in white for lamp post. Awesome product, easy to install, great customer service, and fast shipping!! Highly recommend Post Shields!!!
I needed something to cover the lower part of my deck and stair posts. When I found the Post Shield website, I knew I found my solution. I put these around all the 6 x 6 posts and also used the 4 x 4 shields. I couldn't leave the posts at bottom of steps bare, so with a little modification made them work there too. It has changed the whole appearance of the section under my deck for the better. Easy installation. I went one step beyond and put some chaulking at the top of each shield just to prevent water and dirt from going down the corners and such. I couldn't be happier with the product and the company. I actually put these on in between rain showers, so that is why everything has splash mud on it. Can't wait till it all dries so I can weed wack and not worry about causing more damage to my posts. I did measure all my posts before I ordered to make sure they would fit. All fit perfect!